Donut Table Fryer Cut-N-Fry
For donut cutter type K and type N. Easy cleaning, because the basin and heating elements can be quickly removed. Capacity: 16 donuts = approximately 420 donuts/hour.
Features:
Includes 2 immersible grates, stainless steel housing and basin, drip pan (can be installed right or left) that serves also as a folding lid, with indicator lights and circuit breaker to protect against overheating.
Features:
Includes 2 immersible grates, stainless steel housing and basin, drip pan (can be installed right or left) that serves also as a folding lid, with indicator lights and circuit breaker to protect against overheating.
H 25 cm x W 46 cm (closed) x D 56 cm, power: 240 V/4.4 kW, weight: 24 kg

Donut Fryer Stand
For donut cutter type B and type F. Easy to clean, because the basin and heating elements can be removed quickly. An unheated area below the heating elements prevents the burning of batter sediment. As a result, the frying grease is kept in better condition. Holding volume: 44 kg shortening. Capacity: approximately 1200 donuts/hour with a frying time of 90 seconds.
Features:
Stainless steel housing and basin, stainless steel drip pan (can be installed right or left), folding lid, with indicator lights and circuit breaker to protect against overheating, safety drain cock.
Without donut cutter.
Features:
Stainless steel housing and basin, stainless steel drip pan (can be installed right or left), folding lid, with indicator lights and circuit breaker to protect against overheating, safety drain cock.
Without donut cutter.
H 97 cm x W 86 cm (closed) x D 89 cm, power: 380/440 V/3 ph/15.6 kW, weight: 134 kg

Table Fryer, flat
This high-performance top-end fryer is suited not only for French Fries, but for all types of fried food products. It is conceived as a modular system, permitting flexibility in installation. Also the material is top-quality: the unit is completly constructed of stainless steel. Volume: 30 liters
W 57 cm x H 8 x D 44 cm (dimensions of the fryer)
W 67 cm x H 37 cm x D 65 cm (dimensions including the electrical control panel and heating coils)
Power: 400 V/15 kW
W 67 cm x H 37 cm x D 65 cm (dimensions including the electrical control panel and heating coils)
Power: 400 V/15 kW

Batter Dispenser for Fried Donuts
Donuts hand-made: each squeeze of the lever produces a delicious cake donut that you just need to fry-up. Capacity: maximum 2 liter.
Weight: 2 kg

Donut-Cutter Type "B"
Whether making donuts, " Spitzkuchen" or "Quarkbõllchen" - the job gets done with little effort. The donut cutter is simple to use and easy to clean. With swivel arm, mounted to a wall or table. By changing the valve a variety of items can be produced. Filling quantity: 7 kg, capacity: 60 to 100 donuts/minute.
H 61 cm x W 39 cm x L 45 cm, weight: 23 kg (table mounted)

Donut Cutter Type "N"
The unit corresponds to the donut cutter 1533, but the filling quantity amounts to 5 kg, capacity: 60 to 100 donuts/minute.
H 44 cm x W 28 cm x L 45 cm, weight: 18 kg (table mounted)

Fryer Stand, flat
Like item 1537, but with the addition of a base unit. Volume: 30 kg shortening.
H 29 cm x W 65 cm x D 54 cm (dimesions of the fryer)
W 65 cm x H 43 cm x D 65 cm (dimensions including the electrical control panel and heating coils)
H 90 cm x W 65 cm x D 65 cm, 380/400 V/15 kW
Power: 400 V / 15 kW
W 65 cm x H 43 cm x D 65 cm (dimensions including the electrical control panel and heating coils)
H 90 cm x W 65 cm x D 65 cm, 380/400 V/15 kW
Power: 400 V / 15 kW

Elektric Donut Cutter Type "F"
The unit corresponds to the donut cutter item 1533, but is equipped with motor-driven actuation, which achieves a higher level of productivity. Filling quantity: 7 kg, capacity: approximately 115 donuts/minute.
H 71 cm x W 29 cm x L 47 cm, power: 230 V/570 W, weight: 34 kg (table mounted)

Deutsch





